+90 535 465 33 07
info@betatron.com.tr

7006 and 7007 Loop-Mates

Anasayfa / Ürünlerimiz / 7006 and 7007 Loop-Mates

7006 and 7007 Loop-Mates

Product Description:

The 7006 is a single function low-cost pocket sized simulator, designed for test and calibration of process loops. Simplicity of operation is the key feature – no keypads or complicated selections. Engineers will be able to pick up the 7006 and get to work immediately. Just select 4 – 20mA or 10V loop, and TxSim, RxTest, or 0 to 10V DC simulation mode. Internal loop drive supply for powering the loop is also available if required.

 

As a loop simulator it acts as a source to provide the loop signals, 4 – 20mA or 0 – 10V. No complicated selection of the output, just operate up/down buttons to increase or decrease the signal. There are 7 set-points, 0%, 10%, 25%, 50%, 75%, 90%, 100%. Each is indicated on a high brightness LED and an audible beep sounds as you step between them. Auto-stepping mode (adjustable rate) allows the 7006 to be left connected stepping up and down.

 

For loop signal checking Time Electronics offer the 7007 Loop-Mate as an accompanying instrument. An engineer can then move to another location to check that the signal is arriving correctly and is within specification. The 7007 is a dedicated loop signal indicator, just as easy to operate. Once again select the loop type, 4 – 20mA, or 0 – 10V, and whether you want the display in direct units, or % of span. The LCD display shows the signal to an accuracy of 0.05% either in mA, V, or % of span.

 

Both units are powered by a single standard PP3 battery that gives up to 40 hours continuous use.

 

Product Specification:

7006 LOOP-MATE 1

Range   4 – 20mA or 0 – 10V

Set-Points          0, 10, 25, 50, 75, 90, 100% of span

Accuracy            0.1%

Modes  TxSim or RxTest

Loop Supply      Internal, 25mA max

Auto-Step          Up/Down/Up, 0.5, 1, 2, 4, or 8sec/step

7007 LOOP-MATE 2

Range   4 – 20mA, 0 – 10V, 0 – 50V

Display LCD 4 digits, mA, V, or % of span

Accuracy            0.05%

Modes  RxSim, TxTest, or 50mA/50V measure

Loop supply       Internal, 25mA max

Power   PP3 battery, typical life 40 hours

Dimensions       H140 x W65 x D30mm

Weight 7006 = 180g. 7007 = 200g

Supplied With   Carry Case and user manual

Optional Extras Calibration certificates traceable to NPL and UKAS

Country of Origin           UK

BETATRON MÜHENDİSLİK, 2018 yılında elektrik ve otomasyon alanında hizmet vermek amacıyla Eskişehir’de kurulmuştur.

İLETİŞİM BİLGİLERİ